Numerical investigation of the effects of sluice spillway roof profiles on the hydraulic characteristics

There is a need for evolving hydraulically efficient roof profile of bellmouth for high head sluice spillways, as sluice roof is susceptible to cavitation damage. In this paper, formulation and development of a numerical model for simulating the spillway flow and its application to a sluice spillway are presented. The main focus of the simulation study is to apply the developed model to investigate the effects of sluice roof profile geometry on the pressure distribution, the discharge coefficient and the nature of flow regime within the sluice bellmouth. From the analysis of results for eight different roof profiles by varying the entry and exit angles of elliptic bellmouth transition, some important observations have been suggested, which are of practical relevance to hydraulic design engineers. The numerical model results are compared for one profile with physical model study. The simulated results are in close agreement with the measured values. Copyright © 2007 John Wiley & Sons, Ltd.     

Sonication effects on non-radical reactions. A sonochemistry beyond the cavitation?

The kinetics of pH-independent hydrolysis of 4-methoxyphenyl dichloroacetate were investigated under ultrasonic irradiation with an application of 10% of the maximum power of the equipment and without sonication in acetonitrile–water binary mixtures with a content of acetonitrile ranging from 0.008 to 35 wt.%. Similar kinetic investigations were performed at intensities corresponding to 10%, 20%, 30%, 40%, and 50% of the input energy in solvent mixtures containing 10 wt.% and 25 wt.% acetonitrile. In parallel, the responses of KI and terephthalic acid dosimeters at applied irradiation levels were registered under the same experimental conditions. Significant kinetic sonication effects were found at sound intensities presumably not inducing cavitation in the solution. This result provides an experimental evidence of kinetic effects of ultrasound in the absence of cavitation. A disturbing impact of cavitation on the ultrasonic acceleration of the reaction was found. The implications of these findings were discussed.     

The influence of air content in water on ultrasonic cavitation field

Cavitation is a complex physical phenomenon affected by many factors, one of which is the gas dissolved in the medium. Researchers have given some efforts to the influence of gas content on sonoluminescence or some specific chemical reactions in and around the bubble, but limited work has been reported about the influence on the ultrasonic cavitation field distribution. In this work, the intensity distribution of the ultrasound field in a cleaning tank has been measured with the hydrophone. After analysed and visualised by MATLAB software, it was found that the cavitation intensity distribution in degassed water was much better than that in tap water. And further study proved that degassing process can improve the cavitation effect dramatically both in intensity and scope. Finally, the cavitation fields in mediums with different gas content were measured and the specific influence of air content on cavitation field was discussed.     

Monitoring of transient cavitation induced by ultrasound and intense pulsed light in presence of gold nanoparticles

One of the most important challenges in medical treatment is invention of a minimally invasive approach in order to induce lethal damages to cancer cells. Application of high intensity focused ultrasound can be beneficial to achieve this goal via the cavitation process. Existence of the particles and vapor in a liquid decreases the ultrasonic intensity threshold required for cavitation onset. In this study, synergism of intense pulsed light (IPL) and gold nanoparticles (GNPs) has been investigated as a means of providing nucleation sites for acoustic cavitation. Several approaches have been reported with the aim of cavitation monitoring. We conducted the experiments on the basis of sonochemiluminescence (SCL) and chemical dosimetric methods. The acoustic cavitation activity was investigated by determining the integrated SCL signal acquired over polyacrylamide gel phantoms containing luminol in the presence and absence of GNPs in the wavelength range of 400–500 nm using a spectrometer equipped with cooled charged coupled devices (CCD) during irradiation by different intensities of 1 MHz ultrasound and IPL pulses. In order to confirm these results, the terephthalic acid chemical dosimeter was utilized as well. The SCL signal recorded in the gel phantoms containing GNPs at different intensities of ultrasound in the presence of intense pulsed light was higher than the gel phantoms without GNPs. These results have been confirmed by the obtained data from the chemical dosimetry method. Acoustic cavitation in the presence of GNPs and intense pulsed light has been suggested as a new approach designed for decreasing threshold intensity of acoustic cavitation and improving targeted therapeutic effects.     

Electrochemical investigations of stable cavitation from bubbles generated during reduction of water

Megasonic cleaning is traditionally used for removal of particles from wafer surfaces in semiconductor industry. With the advancement of technology node, the major challenge associated with megasonic cleaning is to be able to achieve high cleaning efficiency without causing damage to fragile features. In this paper, a method based on electrochemistry has been developed that allows controlled formation and growth of a hydrogen bubbles close to a solid surface immersed in an aqueous solution irradiated with ∼1 MHz sound field. It has been shown that significant microstreaming from resonating size bubble can be induced by proper choice of transducer duty cycle. This method has the potential to significantly improve the performance of megasonic cleaning technology through generation of local microstreaming, interfacial and pressure gradient forces in close vicinity of conductive surfaces on wafers without affecting the transient cavitation responsible for feature damage.     

流动微泡群瞬态空化强度时域分布的比例反馈调节*

声波、血流环境及流动微泡群的稳定性都会影响焦区内瞬态空化强度(ICI)在超声作用时间内的分布,从而影响基于瞬态空化的治疗效率和生物安全性。本文在搭建仿体中流动微泡群瞬态空化发生和实时测量系统的基础上,设计了基于LabView FPGA的比例反馈控制器,在保持脉冲重复频率和脉冲长度不变的条件下,通过选择适当的比例系数,依据当前周期的声波激励下实时测量的ICI,实时调节下一周期声波信号的峰值负压,以调控ICI在时间上的分布。研究表明,在最优比例系数(1 × 107)下,和开环系统相比,ICI的稳定率提升~2.31 倍,ICI的时域下降速率减小~94.41%;在超声作用时间内总ICI也基本达到期望水平。这些结果表明该比例反馈控制器在调控脉冲超声激励下流动微泡群ICI时域分布的有效性,有望改进瞬态空化在相关疾病治疗中的效率和安全性。     

Quantitative evaluation of the microjet velocity and cavitation erosion on a copper plate produced by a spherical cavity focused transducer at the high hydrostatic pressure

Cavitation erosion at the high hydrostatic pressure causes the equipment to operate abnormally for the huge economic losses. Few methods can quantitatively evaluate the cavitation erosion intensity. In order to solve this problem, the cavitation erosion on a copper plate was carried out in a spherical cavity focused transducer system at the hydrostatic pressure of 3, 6, and 10 MPa. Meanwhile, the corresponding cavitation threshold, the initial bubble radius, and the microjet velocity in the ultrasonic field are theoretically analyzed to determine the dimension and velocity of microjet based on the following hypotheses: (1) the influence of the coalescence on the bubble collapse is ignored; (2) the dimension of the microjet is equal to the largest bubble size without the influence of gravity and buoyancy. Using the Westervelt equation for the nonlinear wave propagation and the Johnson-Cook material constitutive model for the high strain rate, a microjet impact model of the multi-bubble cavitation was constructed. In addition, through the analogy with the indentation test, an inversion model was proposed to calculate the microjet velocity and the cavitation erosion intensity. The microjet geometric model was constructed from the dimension and velocity of the microjet. The continuous microjet impact was proposed according to the equivalent impact momentum and solved by the finite element method. The relative errors of the pit depth are 4.02%, 3.34%, and 1.84% at the hydrostatic pressure of 3, 6, and 10 MPa, respectively, and the relative error in the evolution of pit morphology is 7.33% at 10 MPa, which verified the reliability of the proposed models. Experimental and simulation results show that the higher the hydrostatic pressure, the greater the pit depth, pit diameter, the pit-to-microjet diameter ratio, and the cavitation erosion intensity, but the smaller the pit diameter-to-depth ratio. The cavitation erosion intensity becomes significant with the ongoing ultrasonic exposure. In addition, a comparison of the cavitation pit morphology in the microjet pulsed and continuous impact modes shows that the continuous impact mode is effective without the elastic deformation caused by the residual stress. Using the cavitation pit morphology at the different hydrostatic pressures, the microjet velocity can be estimated successfully and accurately in a certain range, whose corresponding errors at the lower and upper limit are 5.98% and 0.11% at 3 MPa, 6.62% and 9.14% at 6 MPa, 6.54% and 5.42% at 10 MPa, respectively. Our proposed models are valid only when the cavitation pit diameter-to-depth ratio is close to 1. Altogether, the cavitation erosion induced by multi-bubble collapses in the focal region of a focused transducer could be evaluated both experimentally and numerically. Using the cavitation pit morphology and the inversion model, the microjet velocity in a certain range could be estimated successfully with satisfactory accuracy.     

The influence of pressure on the acoustic cavitation in saturated CO2-expanded N,N-dimethylformamide

CO₂-expanded organic solvent is a kind of important fluid medium and has broad applications in chemical industry, environmental protection and other fields. Ultrasonic cavitation in gas expanded liquids (GXLs) is conducive to enhancing mass transfer and producing many exciting phenomena. In this paper, the ultrasonic cavitations and streaming in the saturated CO₂-expanded liquid N, N-dimethylformamide (DMF) at 4.2 MPa and 5.2 MPa are observed by a high-speed camera. The cavitation intensity and time trace of pressure pulses are recorded using a PZT hydrophone. The influences of gas–liquid equilibrium pressure and ultrasonic power on the cluster dynamics of transient and stable cavitation are examined. The excess molar enthalpies required for CO₂ dissociation from DMF are calculated by Peng-Robinson equations of state and the change of surface free energy of CO₂-expanded DMF is predicted. The results show that the excess enthalpy of the mixture is one of the key factors to control ultrasonic cavitation at high pressurized conditions, while the surface tension is the key factor for low pressure. As the increase of applied ultrasonic power, the formation and collapsing frequency of bubble clusters increases, and the amplitude and cyclic frequency of pressure pulse are enhanced. The transient cavitation intensity increases as it reaches a maximum value at a certain ultrasonic power and then decreases. The change trends of stable cavitation intensity under different pressures are basically same. It can be concluded from the evidence that ultrasonic cavitation in CO₂-expanded DMF is affected by the combined effect of compression and substitution: compression depresses the nucleation and growth of bubbles, while the high solubility of CO₂ in DMF is conducive to the generation of bubbles in cavitation.     

Removal of field-collected Microcystis aeruginosa in pilot-scale by a jet pump cavitation reactor

Hydrodynamic cavitation has been investigated extensively in the field of water treatment in the last decade and a well-designed hydrodynamic cavitation reactor is critical to the efficient removal of algal and large-scale application. In this paper, a jet pump cavitation reactor (JPCR) is developed for the removal of cyanobacteria Microcystis aeruginos in a pilot scale. The results demonstrate that the photosynthetic activity of M. aeruginosa is greatly inhibited immediately after treatment in the JPCR, and the growth is also hindered after 3 days culture. Moreover, a high cell disruptions of M. aeruginosa is detected after treated by JPCR. The release of chlorophyll-a indicates that the JPCR caused serious rupture to M. aeruginosa cells. The plausible cell disruption mechanisms are proposed in accordance with a fluorescence microscope and scanning electron microscope. Then, the optimization of cell disruption efficiency is also investigated for various operating conditions. The results showed that the algal cell disruption efficiency is improved at higher inlet pressure and the cavitation stage between the unstable limited operation cavitation stage and stable limited operation cavitation stage. The effect and optimization of JPCR on algal reduction are highlighted. The results of the study promote the application of hydrodynamic cavitation on algal removal and provide strong support for JPCR application in algal removal.     

The dynamics of cavitation bubbles in a sealed vessel

A model of cavitation bubbles is derived in liquid confined in an elastic sealed vessel driven by ultrasound. In this model, an assumption that the pressure acting on the sealed vessel due to bubble pulsations is proportional to total volume change of bubbles is made. Numerical simulations are carried out for a single bubble and for bubbles. The results show that the pulsation of a single bubble can be suppressed to a large extent in sealed vessel, and that of two matched bubbles with same ambient radius can be further suppressed. However, when two mismatched bubbles have the same ambient radii, an interesting breathing phenomenon takes place, where one bubble pulsates inversely with the other one. Due to this breathing phenomenon the suppression effect becomes weak, so the maximum radii of two mismatched bubbles can be larger than that of a single bubble or that of two matched bubbles in sealed vessel. Besides that, for two mismatched bubbles with different ambient radii, the small one in sealed vessel under some certain parameters can pulsate as strong as or even stronger than that of a single bubble in an open vessel.